Nova212 Posted January 9, 2007 Report Posted January 9, 2007 Hey all 212 engineers. Looking for some help with an electrical snag. Have a machine that has a persistent No #1 Gen that wont come online. Replaced the DC control box and it comes online for awhile then blows the DC control box. Not sure where to start. Please help. Thanks Quote
Underslung Posted January 9, 2007 Report Posted January 9, 2007 Hey all 212 engineers. Looking for some help with an electrical snag. Have a machine that has a persistent No #1 Gen that wont come online. Replaced the DC control box and it comes online for awhile then blows the DC control box. Not sure where to start. Please help. Thanks Do the power diode check in the MM you may have a bad or intermittent diode, could also be a short on the #1 side, once had a machine with a few fillings in the deck plug at the starter that would short the pins and do the same thing and it drove me crazy trying to find it. The DCU has a lot of circuits tied into it so start wringing em out. Quote
Spitzair Posted January 9, 2007 Report Posted January 9, 2007 Nova, Not sure if this will help you but we recently had a Generator on an Astar that wouldn't come on line every so often or would drop offline just like that, it turned out to be the armature shorting out inside the unit... Finally figured that one out when we just changed the generator and sent it in for rebuild after nothing else would fix it... Hope this helps somewhat... Quote
BAH Posted January 9, 2007 Report Posted January 9, 2007 If it is a single buss machine, the diode check is not applicable. Have you swapped generators? I have also seen the wires chaffing on the inside of the cowls causing them to drop off. Don't forget you have 2 of everything in a 212, try swapping component by component, takes time, but you never know. Quote
splitpin Posted January 9, 2007 Report Posted January 9, 2007 I agree with BAH. First thing you should do is swap gennys. Start from the source and work your way downstream. Quote
BAH Posted February 3, 2007 Report Posted February 3, 2007 Well Nova212, looks like the fault was the generator field circuit breaker. Reset it a couple of times and the gen came online. Gen has not fallen off line since. Overhaul of the DCU's showed the same diode blowing in all the failed boxes, I guess it was causing a feedback into the box or something. The breaker still had continuity when metered. Don't you hate it when it is a little item like this that stumps a lot of people. An apprentice told me the breaker popped this summer, work fine after reseting. Quote
rainman Posted February 3, 2007 Report Posted February 3, 2007 Now if you can only find the problem with the good ol ICS up front of that ship. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.