newt Posted September 29, 2006 Report Share Posted September 29, 2006 i use plasitlube #3 non moly and have had great success....i remove them every 100hrs anyways.... Quote Link to comment Share on other sites More sharing options...
helimat Posted September 29, 2006 Author Report Share Posted September 29, 2006 i use plasitlube #3 non moly and have had great success....i remove them every 100hrs anyways.... Are you in a corrosive environment? I had thought of trying that, I have used it on Bells before... Quote Link to comment Share on other sites More sharing options...
JLMG Posted January 27, 2007 Report Share Posted January 27, 2007 Clean the pins thouroughly, use some scotchbrite to remove the corrosion if any, paint and bake them with Ever Lube, then use lubriplate to install them, we never pack the center of the blade bushings.... Quote Link to comment Share on other sites More sharing options...
dave Posted January 31, 2007 Report Share Posted January 31, 2007 Another thought on blade pins Buff Coat with TIOLUBE 460 (MIL-C-8937) or Gunblue Coat with Dow 3400A Bake dry 355 grease or Plastilube Quote Link to comment Share on other sites More sharing options...
freakadapter Posted March 22, 2007 Report Share Posted March 22, 2007 We are operating in the salty air of coastal BC, which is quite hard on the blade pins. We have tried a variety of products to lube the pins, to different levels of success. The former staff used Moly (Which was terrible.) In an effort to improve life of the pins, we have tried 355 graphited grease, (Better), and Lubriplate (The best so far, but sometimes it seems to get washed out). We have been told about 'Blue Grease', and we will be trying it next. We paint the pins with dry graphite first, and it is obvious that it helps if it is baked on. My question is, what have you guys been using? What is your experience with these products? Is there other products out there that work well? Any insight would be appreciated. I would especially like to hear from those of you that are operating in the Gulf of Mexico, as it is an even harsher environment. Thanks Helimat :clue: Quote Link to comment Share on other sites More sharing options...
Gordon Dale Posted April 7, 2007 Report Share Posted April 7, 2007 use non moly plasti lube, available from Aviall, never use any lubricant with Moly Disulphide on steel parts, anybody who has worked on these helicopters for any length of time should know about the service letter prohibiting moly disulphide based products on steel driveshaft splines and blade pins, as when mixed with water will turn into sulphuric acid and result in nasty pitting corrosion. Gordon Dale Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.