tamboril Posted July 18, 2020 Report Share Posted July 18, 2020 I’m an owner, and I need help with the filler cap for the MR transmission. It is yellow with a button on top and a chain. How the heck do you remove it? The maintenance manual doesn’t say will post pic later. Quote Link to comment Share on other sites More sharing options...
GregJ Posted July 18, 2020 Report Share Posted July 18, 2020 Push down & turn CCW. Quote Link to comment Share on other sites More sharing options...
GregJo Posted July 18, 2020 Report Share Posted July 18, 2020 Are you just the owner or are you a pilot or mechanic? If you are neither, then you should not be trying to open the transmission oil filler cap. In addition if you overfill the transmission it will blow out the excess oil and possibly damage the oil seals. If you can shake the transmission by grabbing the mast and move the mast and transmission from side to side and see any oil in the visor then it has enough. This is caused by some of the oil draining back to the freewheeling unit when the helicopter is static. Quote Link to comment Share on other sites More sharing options...
GrayHorizons Posted July 19, 2020 Report Share Posted July 19, 2020 i'd change that air duct and zip tie while you're at it too 1 Quote Link to comment Share on other sites More sharing options...
GrayHorizons Posted July 19, 2020 Report Share Posted July 19, 2020 1 1 Quote Link to comment Share on other sites More sharing options...
tamboril Posted July 19, 2020 Author Report Share Posted July 19, 2020 Thanks for your reply, GregJ. I'll try again with the pushing and turning. Just want to be able to add oil if I ever find I need to. You're right, though. It is actually on the dot right after shutdown. It just got out of an annual; so I didn't expect it to be low. Everyone else rest assured I've given your comments all the attention they deserve. Quote Link to comment Share on other sites More sharing options...
Iceman Posted July 19, 2020 Report Share Posted July 19, 2020 Tamboril, take a 206 field maintenance course or something. The dot or just below is where you want it. If that’s the happy spot then You’re good. The TR gearbox and Hydraulic reservoir will be your next thing. Let someone else service it till you know what you’re doing. 3 Quote Link to comment Share on other sites More sharing options...
Heliian Posted July 20, 2020 Report Share Posted July 20, 2020 At least he knows where the filler is. I knew a pilot that overfilled the "transmission", which ended up beimg the Hydraulic reservoir. That was after an elementary training session too. Carry on. 1 Quote Link to comment Share on other sites More sharing options...
DGP Posted July 20, 2020 Report Share Posted July 20, 2020 Some good replies here...I would get rid of that zip tie asap ...those things get brittle when exposed to heat and oil...it definitely doesn't meet Bell M&M requirements I can tell you and that hose has seen better days...you are also suppose to have clamps on that hose that attach to the trany mount. Of course nobody does....it will eventually saw a hole thru your cowling...just saying...and definitely rock the trany when checking the oil level...if you are even a little bit off level you will not be getting a correct indication of the oil level. Too much is worse than a little low..I saw a 206 trany spew oil out once from being too full...passengers notified the pilot that oil was running down the rear right window. Now the one about overfilling the hydraulic res was a good one...you can't overfill that one but don't put trany oil in the hydraulic system..DOOH! Quote Link to comment Share on other sites More sharing options...
DGP Posted July 20, 2020 Report Share Posted July 20, 2020 Not that this is revelent to your situation...you should try to get an trany oil cap off of a 407...when they are cold they are are bear! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.