nonolight Posted August 28, 2010 Report Share Posted August 28, 2010 Hi, I am building myself a Jet Ranger simulator since one year: http://nonolight.free.fr/simulateurs/image...mp;nb=2&lg= The last exibition was at Moisselles (LFFE) with a lot of people how test my simulator for the first time: http://www.aircockpit.com/viewtopic.php?f=...lit=lffe#p12619 I am building it for only my pleasure and for passionate people. All partsare building my self like: Rudder: http://www.aircockpit.com/viewtopic.php?f=...48&start=40 GPS: http://www.aircockpit.com/viewtopic.php?f=...t=nonolight+gps Etc... Switch (One for exemple): http://www.aircockpit.com/viewtopic.php?f=99&t=1506 I am sorry but all messages are in french language, if you can't anderstand, you can look at the pictures who are speaking for you (I hope!!) In 26, 27 & 28 november 2010, I show my simulator in Le Bourget near Paris. If you want to visit it.... Regards Nono PS, I had install on the top a little Bell206 how is moving with the command and switch of the simulator. So, the people can anderstand the system moving by the pilot: [vidyoutube] [/vidyoutube] [vidyoutube] [/vidyoutube] Excuse me for the mystakes !! Quote Link to comment Share on other sites More sharing options...
Phil Croucher Posted August 31, 2010 Report Share Posted August 31, 2010 Very nice - is that a flat screeen or are they genuine instruments? Phil Quote Link to comment Share on other sites More sharing options...
Heliian Posted August 31, 2010 Report Share Posted August 31, 2010 Very nice work, thumbs up!! Those seats look way too comfortable though Quote Link to comment Share on other sites More sharing options...
Ryan Posted August 31, 2010 Report Share Posted August 31, 2010 It's way to clean on the inside to be realistic Nice work! Quote Link to comment Share on other sites More sharing options...
nonolight Posted September 1, 2010 Author Report Share Posted September 1, 2010 Hi, Thanks to you ! The seats are due middle back seat of two cars. All part of simulator are building myself except the seats. First time I try to built the seats but sewing fabric was not strong enough : http://nonolight.free.fr/simulateurs/image...mp;nb=1&lg= The gauges are not making by flat screeen. You can see by axemple my "Horizon artificiel" here: You can see the steps for building a gauge like that: http://www.aircockpit.com/viewtopic.php?f=...ht+horizon#p647 If you clic on the picture you can see a démonstration on youtube : http://nonolight.free.fr/simulateurs/image...mp;nb=5&lg= Regards Nono Quote Link to comment Share on other sites More sharing options...
helidriver68 Posted September 2, 2010 Report Share Posted September 2, 2010 hey looks pretty good , maybe try it some time , cyclic looks too high thou might have to cut a couple inches off ,,,,,,,, can we still do that ?????? hahahahahaaha just kidding . but seriously pretty cool . good for you hope it works well for you . H Quote Link to comment Share on other sites More sharing options...
saturnman Posted September 10, 2010 Report Share Posted September 10, 2010 Hey looks like fun!! Anyone here take Vertical up on their offer to build a kit-sim? Quote Link to comment Share on other sites More sharing options...
nonolight Posted December 16, 2010 Author Report Share Posted December 16, 2010 HI every hélicopter' pilot, From few months, I have finished the Cabin's cockpit : http://www.aircockpit.com/viewtopic.php?f=97&t=1468&start=20 My next demonstrations was at Le Bourget and Orly nearly Paris in FRANCE : Le BOURGET: http://www.aircockpit.com/viewtopic.php?f=37&t=1768&start=0 Orly : http://www.aircockpit.com/viewtopic.php?f=37&t=1797&p=16570#p16570 In few months I am about to work on the visual to be better than now ! Regards Nono Quote Link to comment Share on other sites More sharing options...
Guest jacdor Posted December 16, 2010 Report Share Posted December 16, 2010 Felicitation Nono, tres tres beau travail. JD Quote Link to comment Share on other sites More sharing options...
nonolight Posted January 30, 2012 Author Report Share Posted January 30, 2012 Hi, Since few months, I send to you some news about my simulator. - I have build my curve screen - I built an Allison turbine in 1/2 scale for show the system motor on the helicopter board - I install two cameras in cockpit to see the pilots and front side - The little helicopter on top is moving with the action on the simulator My next project is to make it move in little circle similar of the moving by rotor. You can see more on this link : http://www.cielquebecois.com/simulateurs-de-vol/1653-bruno-leger-construit-un-simulateur-de-bell-206-tres-realiste And my turbine in build here : http://www.aircockpit.com/viewtopic.php?f=37&t=2565&p=28988&hilit=allison#p28988 If you go to Paris in France, visit me and take off with my simulator only for pleasure Regards Nono Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.